Skip Navigation
Skmp to contents

한국전기화학회 한국전기화학회

gnbBg

Vol.24, No.4, April 2021

Preparation of V3.5+ Electrolyte for Vanadium Redox Flow Batteries using Carbon Supported Pt Dendrites Catalyst카본 담지 백금 덴드라이트 촉매를 이용한 바나듐 레독스 흐름전지용 3.5가 바나듐 전해질의 제조
JKES Vol.24, No.4, pp.113-119, April 2021
DOI : 10.5229/JKES.2021.24.4.113
Hojin Lee and Hansung Kim이호진·김한성
Dept. of Chemical and Biomolecular Engineering, Yonsei University 50 Yonsei-ro, Seodaemun-gu, Seoul 03722, Korea연세대학교 화공생명공학과

본 연구에서는 유기환원제로 포름산과 촉매로 PtD/C를 사용하여 불순물이 없는 고품질 V3.5+ 전

해질을 생산하였고 이를 VRFB에 적용하였다. PtD/C 촉매의 잘 배향된 3D 수상 돌기 구조는

포름산 산화 반응과 바나듐 환원 반응에 높은 활성을 보여 주었다. 그 결과 PtD/C의 촉매 전환

율은 2.73 mol g-1 h-1로 polyol방법을 제조된 Pt/C의 전환율 1.67 mol g-1 h-1보다 더 높았다.

또한 VRFB 충방전 실험에서 촉매 반응으로 생성된 V3.5+ 전해질은 전해 방법으로 제조 된 표

준V3.5+전해질과 동일한 성능을 보여 줌으로서 VRFB의 전해질로 사용 가능함을 증명하였다.

 

In this study, impurity free V3.5+ electrolytes were prepared using formic acid as a

reducing agent and PtD/C as a catalyst and it was applied to VRFB. The well-oriented 3D

dendrite structure of the PtD/C catalyst showed high catalytic activity in formic acid oxidation

reaction and vanadium reduction reaction. As a result, the conversion ratio of electrolyte using

the PtD/C was 2.73 mol g-1 h-1, which was higher than that of 1.67 mol g-1 h-1 of Pt/C prepared

by the polyol method. In addition, in the VRFB charging and discharging experiment, the V3.5+

electrolyte produced by the catalytic reaction showed the same performance as the standard

V3.5+ electrolyte prepared by the electrolytic method, thus proving that it can be used as an

electrolyte for VRFB.

Keyword : Vanadium redox flow battery, Platinum dendrite, Formic acid, Vanadium electrolyte, Catalytic reduction method

Full Text PDF 다운로드

위로가기

COPYRIGHT (C) KECS. ALL RIGHTS RESERVED.

  • 사업자등록번호: 209-82-06548
  • 사업자명: (사)한국전기화학회
  • 대표자: 이재준
  • 주소: 02566 서울특별시 동대문구 왕산로 122(용두동, 한방천하 포스빌 1715호)
  • 대표전화: +82-2-568-9392
  • 자주하는 질문 (FAQ)
  • 전자우편: kecs98@kecs.or.kr (대표)